Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

SAA7134 Datasheet PDF - Philips Electronics

SAA7134 image

Part Name
SAA7134

Other PDF
  no available.

PDF
DOWNLOAD     

page
52 Pages

File Size
200.2 kB

MFG CO.
Philips
Philips Electronics Philips

GENERAL DESCRIPTION
The SAA7134HL is a single chip solution to digitize and decode video and sound, and to capture both data streams through the PCI-bus.


FEATURES
PCI and DMA bus mastering
• PCI 2.2 compliant including full Advanced Configuration and Power Interface (ACPI)
• System vendor ID, etc. via EEPROM
• Hardware support for virtual addressing by MMU
• DMA bus master write for video, audio, VBI and TS
• Configurable PCI FIFOs, graceful overflow
• Packed and planar video formats, overlay clipping.

TV video decoder and video scaling
• All-standards TV decoder: NTSC, PAL and SECAM
• Five analog video inputs: CVBS and S-video
• Video digitizing by two 9-bit ADCs at 27 MHz
• Sampling according ITU-R BT.601 with 720 pixels/line
• Adaptive comb filter for NTSC and PAL, also operating for non-standard signals
• Automatic TV standard detection
• Three level Macrovision copy protection detection according to Macrovision Detect specification Revision 1
• Control of brightness, contrast, saturation and hue
• Versatile filter bandwidth selection
• Horizontal and vertical downscaling or zoom
• Adaptive anti-alias filtering
• Capture of raw VBI samples
• Two alternating settings for active video scaling
• Output in YUV and RGB
• Gamma compensation, black stretching.

TV sound decoder and audio I/O
• TV stereo decoding for NICAM and dual FM
• Audio sampling locked to video field rate, no drift of audio stream against video stream
• On-chip stereo audio ADCs and DACs (2 × 16-bit)
• Sampling rate, e.g. 32, 44.1 and 48 kHz
• Integrated analog audio pass-through for analog audio loop back cable to sound card.

Peripheral interface
• I2C-bus master interface: 3.3 and 5 V
• Digital video output: ITU and VIP formats
• TS input: serial or parallel
• General purpose I/O, e.g. for strapping and interrupt
• Propagate reset and ACPI state D3-hot.

General
• Package: LQFP128
• Power supply: 3.3 V only
• Power consumption of typical application: 1 W
• Power-down state (D3-hot): <20 mW
• All interface signals 5 V tolerant
• Reference designs available
• SDK for Windows (95, 98, NT, 2000 and XP), Video for Windows (VfW) and Windows Driver Model (WDM).


Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]